K-Tec Year-End Demonstration Equipment For Sale
October 22, 2015
Please contact us for purchase or rental of pre-owned equipment including: Motor Grader, Crawler Dozer, Articulated Dump Truck, Articulated Scraper Hauler, Agriculture Tractors, and K-Tec Scrapers.
K-Tec Enhances the World’s Largest Construction Pull Scraper
August 31, 2015
K-Tec Earthmovers announces the 1263 ADT scraper to move a 63 cubic yard mountain of dirt in a single pass.
Crushing the Competition with Efficient Scraper Equipment
August 05, 2015
A world leader in the aggregate industry with a rock-solid foundation of heritage, identified the need to introduce cutting edge equipment in the efficient transportation of quarried limestone. K-Tec’s 1243ADT scraper was a logical fit with TCS as the units can transport, dump, and level the stone all by themselves. Additionally, the large capacity of the scraper would mean less trips around the quarry. These efficiencies would surely save the company considerable costs on labor, fuel, and equipment maintenance expenses.
International Earthmoving Emphasis
July 22, 2015
K-Tec Earthmovers Inc. have hired Allan Friesen for International Business Development to add to the team of K-Tec Product Specialists, who are currently on a tour of Latin America.
To request an onsite visit for a K-Tec jobsite analysis in your country, please contact AllanF@ktec.com.
Brisbane, Australia Airport’s New Runway Project
June 17, 2015
K-Tec's scrapers are an integral piece of earthmoving equipment in developing a 3.3km long, 60m wide runway project. 17 million cubic yards of sand is to be moved between 2014 and 2020 completion date.
K-Tec Doubles Up Capacity with New Train Earthmoving Scrapers
March 03, 2015
K-Tec Earthmovers announces 1233ADT/ADT Train scrapers to move a tandem heaped capacity of 72 cubic yards with a single Articulated Dump Truck.
Redhead Equipment Enhances Earthmoving Product Line
February 09, 2015
Redhead Equipment announces agreement to be authorized dealer of K-Tec Scrapers in Saskatchewan
Rental Focus on Weapons Range
July 15, 2014
Based out of Austin, TX, NEU Security Services specializes in projects at defense sites and federal buildings around the country. The project at Range 111 at Fort Carson was more earthwork than what they typically run into on most of their projects...With thousands of yards of material to move and miles of trenches to excavate, having a fleet of equipment that’s dependable and efficient to run is critical to the success of the project...
NEU currently has a pair of Terex 40-ton haul trucks pulling 33yd K-Tec scrapers doing the bulk of the cut and backfill work on the project. “This is the first time I’ve used a haul truck/scraper rig for moving fill,” said Hank. “I’ve got to say that it’s been working really well. The advantages over running a straight haul truck makes it an attractive way to cut and fill. They self-load and a good operator can manage the spoil without needing a dozer to level the dump area. You can move a lot of material in a day with these rigs.”
K-Tec 1233ADT & Caterpillar 740 ADT Complete Setup For Sale
July 02, 2014
This efficient scraper solution was used exclusively by K-Tec Earthmovers for Research & Development and Demonstration purposes. It is complete and immediately ready to move dirt efficiently, while reaching haul road speeds of 36mph. The 40 Ton Caterpillar ADT has Turbo ECM with an excess of 600+HP. The 1233ADT has a heaped capacity of 36 Cubic Yards, while having 26.5 x R25 tires. The units are connected with a scraper hitch system including hydraulic filtration.
Australian Premiere of ADT/Scraper Combo Being Released in Toowoomba, QLD
June 17, 2014
Announcing the Australian Premiere of efficient ADT/Scraper earthmoving equipment. Tenkate Plant Hire's Volvo 40-Ton ADT matched to a K-Tec 1233ADT scraper will be showcased at the Surat Basin Energy & Mining Expo, June 18-19 at Site P3105 in Toowoomba, QLD.
Groundbreaking Innovation in Scraper Manufacturing
June 16, 2014
"K-Tec's core values are what have contributed to its ongoing success... We do what we say we're going to do. We've had many repeat customers, good testimonials of our after-sales services and our warranty policies." "Our Goal is to keep doing what we're doing and grow as it is feasible. Our aim is not to be the largest company, but to be the best in scraper manufacturing."
Special Challenges Call For Special Solutions
April 08, 2014
A CUSTOMER’S SUCCESS STORY - “Productivity on site has increased as the machines never need to stop. Our operators work 10 hour shifts and the Volvo haulers clock about 2,000 hours on average a year.”
Scott Drury, President, Bloomsdale Excavating
K-Tec’s NEW 43 Cu.Yd. Scraper Model Revealed at ConExpo
March 04, 2014
Inspect The Unexpected: Self-Loading Earthmoving Efficiency.
K-Tec Announces Strongco as Authorized Scraper Dealer
February 21, 2014
K-Tec are the Only Scrapers Approved, Certified and Supported by Volvo CE
K-Tec Releases 1:50th Scale Die-Cast Scraper Model
February 12, 2014
First Edition Model Available for Sale at ConExpo Booth# 3266
K-Tec Earthmovers Inc. adds dealer in Western Canada
January 29, 2014
Great West Equipment: New Dealer of K-Tec Scrapers in British Columbia & Yukon Territory
America’s Largest Landfill
October 31, 2012
Bloomsdale Excavating Company, Inc. performed the site preparation work for the nation’s largest landfill. Moving over 1.2 million square yards of dirt, Bloomsdale delivered high quality work, met an aggressive production schedule, as well as providing a cutting edge, competitive bid.
New Manufacturing Facility
March 27, 2012
K-Tec Earthmovers has begun full-scale production at a new manufacturing plant located in Rosenort, Manitoba, Canada.
A Productive Pairing
November 24, 2011
Contractors have recently been gaining large advantages in earthmoving, by using K-Tec earthmoving scrapers with Articulated Dump Trucks (ADT’s) as power units. This productive pairing of equipment provides a return on investment, leading to increased profitability.
October 19, 2011
The development of towed pan and motor scrapers is increasingly being driven by a construction market demanding larger load capacity, more economical operation and tougher construction.